Lackender by ECS Skid Steer Attachments: Seasonal Fan Favorites
From land clearing and management to hay equipment, there is a Lackender by ECS skid steer attachment designed to tackle whatever your project is. Let’s take a look at some of the Lackender by ECS skid loader attachment fan favorites for this season.
The Hay Bale Accumulator Grapple takes the work out of dealing with small bales. Quickly stack hay bales in the field and load them on a trailer. With this skid steer attachment, there is no need for multiple attachments or additional labor because all of the work can be completed by one person without having to leave the comfort of the skid loader cab. The Hay Bale Accumulator Grapple is a must-have skid loader attachment for hay producers to save time, money and overall backaches. Frankly, it just makes dealing with small bales a whole lot easier.
Available Sizes
» 10 Bale | 886 lbs
Specifications
» 2″ x 6″ Cylinder
» 9″ Hooks
» Radial Bearings
» Able to Carry 8-10 Square Bales of Hay
» Adjustable Width Sides
» Powder-coated Finish
» Protective Sleeve on Hydraulic Hoses
» Euro Style and John Deere Mounts Available
The Lackender by ECS Hay Forks are an essential for hay and livestock producers to have in their barn. The hay forks allow you to easily move hay bales – no grunt work is necessary. Each hay fork in the line-up is rated at 2,800 lbs with non-adjustable, fixed spacing between the prongs.
Available Sizes
» 1-Prong | 186 lbs
» 2-Prong | 203 lbs
» 3-Prong | 259 lbs
Specifications
» 49″ Prong Length
» Powder-coated Finish
» Euro Style and John Deere Mounts Available
» 32″ Prong Fixed Spacing Standard on 2-Prong; 36″ or 40″ Available Custom
Have a land clearing job that leaves you shaking your head on how you’re going to get it accomplished? Never fear, the Extreme Duty Brush Cutter skid loader attachment is here! With bi-directional blades powered by a high torque motor, this skid loader brush cutter is able to stand up to tough brush. It also features a 100HP right angle Omni gearbox with a 6-bolt flange and does not require case drains.
Available Sizes
» 60″ | 14-20gpm
» 72″ | 14-20gpm
» 60″ | 16-26gpm
» 72″ | 16-26gpm
» 78″ | 16-26gpm
Specifications
» 6″ Cutting Capacity
» 3/16″ Deck with 3/8″ AR400 Reinforced Sides
» High Torque Motor with 3,000 PSI Relief Valve
» 3 Bi-directional Blades Made with 5/8″ AR400
» 3/8″ Double Clover Leaf Shaped Blade Holder
» Powder-coated Finish
» Protective Sleeve on Hydraulic Hoses
» Euro Style and John Deere Mounts Available
» Optional: 1/4″ Deck Upgrade and Mulching Teeth
Have other skid loader attachment needs? Lackender by ECS has a full line-up of skid steer attachments for a variety of jobs.